Huawei eKitEngine AP160 Access Point
Huawei eKitEngine AP160 Access Point - Image 2
Huawei eKitEngine AP160 Access Point - Image 3
,

Huawei eKitEngine AP160 Access Point

Compare
  • Huawei
  • eKitEngine AP160 is a Wi-Fi 6 (802.11ax) wall plate 86×86 access point (AP) with an 8 mm ultra-thin panel. It provides services
    simultaneously on the 2.4 GHz (2×2 MIMO) and 5 GHz (2×2 MIMO) frequency bands, achieving a maximum device rate of 1.775 Gbps.

3.700,00 EGP

  • Feature Descriptions
  • Wi-Fi 6 (802.11ax) standard
  •  As the latest Wi-Fi standard defined in IEEE 802.11, 802.11ax improves the user access capacity and bandwidth in high-density access
    scenarios, reducing service latency and enhancing user experience.
  •  802.11ax supports multi-user multiple-input multiple-output (MU-MIMO) on both the 2.4 GHz and 5 GHz frequency bands, allowing
    an AP to transmit data to and receive data from multiple STAs simultaneously and multiplying the utilization of radio spectrum
    resources.
  •  802.11ax supports 1024-quadrature amplitude modulation (QAM), improving data transmission efficiency by 25% compared with
    802.11ac (supporting 256-QAM).
  •  Orthogonal frequency division multiple access (OFDMA) technology enables the AP to transmit data to multiple STAs at the same timeusing different subcarriers, reducing latency             improving network efficiency.
  •  Spatial reuse (SR) technology uses basic service set (BSS) coloring to enable APs and STAs to distinguish overlapping BSSs, minimizing
    co-channel interference.MU-MIMO
    The AP supports MU-MIMO and a maximum of four spatial streams, two spatial streams at 2.4 GHz and two spatial streams at 5 GHz. The
    MU-MIMO technology enables an AP to send data to multiple STAs simultaneously, which doubles the radio spectrum resource usage,
    increases the number of access users and bandwidth, and improves user experience in high-density access scenarios.
  • High-speed access
    The AP supports 80 MHz frequency bandwidth, which increases the number of available data subcarriers and extends transmission
    channels. In addition, the AP uses 1024-QAM and MU-MIMO technologies to achieve a rate of up to 0.575 Gbps on the 2.4 GHz frequency
    band and 1.2 Gbps on the 5 GHz frequency band, and 1.775 Gbps for the device.
    High Density Boost technology
    Huawei uses the following technologies to address challenges in high-density scenarios, including access problems, data congestion, and
    poor roaming experience:
    5G-prior access
  •  The AP supports both 2.4 GHz and 5 GHz frequency bands. The 5G-prior access function enables the AP to steer STAs to the 5 GHzfrequency band preferentially, which reduces loads  and            interference on the 2.4 GHz frequency band, improving user experience.
    Wired and wireless dual security guarantee
    To ensure data security, Huawei APs integrate wired and wireless security measures and provide comprehensive security protection.
    Authentication and encryption for wireless access
  •  The AP supports WEP, WPA/WPA2-PSK, WPA3-SAE, WPA/WPA2-PPSK, and WPA/WPA2/WPA3-802.1X authentication/encryption
    modes to ensure wireless network security. The authentication mechanism is used to authenticate user identities so that only
    authorized users can access network resources. The encryption mechanism is used to encrypt data transmitted over wireless links to
    ensure that data can only be received and parsed by authorized users.
    Wired access authentication and encryption for the AP
  •  The AP access control ensures validity of APs. The Control and Provisioning of Wireless Access Points (CAPWAP) link protection and
    DTLS encryption provide security assurance, improving data transmission security between the AP and the WLAN AC (WAC).
    Automatic radio calibration
    Automatic radio calibration allows an AP to collect signal strength and channel parameters of surrounding APs and generate an AP topology
    according to the collected data. Based on the interference caused by authorized APs, rogue APs, and non-Wi-Fi interference sources, and
    their loads, the AP automatically adjusts its transmit power and working channel to make the network operate at the optimal performance.
    In this way, network reliability and user experience are improved.
    Cloud-based management
    The AP supports cloud-based management. It provides various authentication functions, such as PSK, Portal, SMS, and social media
    authentication, without the need of a WAC or an authentication server. This greatly simplifies networking and reduces CAPEX. In addition,
    the AP can be deployed on a cloud management platform to implement cloud-based network planning, deployment, inspection, and O&M.
    In multi-branch deployment scenarios, after cloud APs are pre-configured on the cloud management platform, deployment personnel only
    need to power on the cloud APs on site, connect them to network ports of switches, and scan their QR codes to implement the plug-andplay function. Then the pre-configurations are                    automatically delivered to the APs. This mode greatly accelerates network deployment. The
    cloud management platform can monitor the network status, device status, and STA connection status at all sites of tenants in a
    comprehensive and intuitive manner
SKU: eKitEngine AP371 Categories: , Brand:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Huawei eKitEngine AP160 Access Point”

There are no reviews yet.

Related products

Select at least 2 products
to compare